Casting Materials / Μοulds

Καλούπια σιλικόνης σε σχήμα ημισφαιρίων, διάφορων μεγεθών. Περισσότερες πληροφορίες παρακάτω.

Καλούπια σιλικόνης σε σχήμα κύβου. Περισσότερες πληροφορίες παρακάτω.

Καλούπια σιλικόνης σε σχήμα για τετράγωνα σουβερ. Περισσότερες πληροφορίες παρακάτω.

Καλούπια σιλικόνης για γεωμετρικά σχήματα. Περισσότερες πληροφορίες παρακάτω.

Καλούπια σιλικόνης σε σχήμα για εξάγωνα σουβερ. Περισσότερες πληροφορίες παρακάτω.

White porcelain powder, extremely hard, for filling molds. Mixing ratio: 3.3 parts Powder: 1 part water. It dries quickly, releases easily from molds and is solid. When dry, the objects have a porcelain effect and can be easily painted. It air dries in approximately 30 minutes. Full hardening is achieved in 12-24 hours, depending on the humidity and temperature of the room. For this reason, after mixing it must be poured into the mold quickly. It is non-toxic and non-harmful. During curing, a temperature (exothermic reaction) of 30-40ºC develops which then drops very quickly. You can first spray the mold with a layer of Rubbing Spray to prevent bubbles from getting trapped and then fill the mold.

Rubbing alcohol spray is an ideal alcohol-based product to clean your surfaces and remove any trace of grease or dirt. You can still easily clean tools you have used with resins as long as it has not started to dry. You can also use the spray to create special effects on resins, such as with pigment or micas powders that will give the impression that they are floating in the material.