Painting

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1). Thinner: Water Handling Shake well before use. AERO TEX is ready to use. Should be mixed with AERO COLOR® Professional in a ration of 1:1. Wash, dry and iron the material beforehand. Spray application wet. After finishing the design let it dry out. Iron the reverse side (cotton about 2 min.; silk / wool about 4 – 6 min.; synthetics about 8 min.; temperature should be adapted to the fabric!). Washable at 30 °C; do not dry clean. The product can be diluted with water, but dries up to a water-insoluble film. Please clean tools as soon as possible with water and/or AERO CLEAN RAPID 50606. Best results are achieved with spray application at processing temperatures between 15 and 30 °C, 2 bar air pressure and a nozzle size of > 0,15 mm for coloured shades and 0,3 mm for effect colours. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required. Sizes: 28 ml

This medium is for the preparation of watercolour paper so that already dreid colour can be removed afterwards, so a watercolour painting can be modified or corrected. Especially usefull for staining watercolours, which are hard to remove, marked with the triangle symbol. The medium has to be applied before the colour application, as it isolates the paper. Using very soft, textured paper types like e.g. rag paper, the medium has to be applied purely. For stronger sized papers the medium should be thinned with water. Pre-tests are recommended. As the Lift-off Medium dries to a water-insoluble film, it must never be put into the pans. Please clean tools as soon as possible with water and soap.