Containing natural oils, this Daler Rowney solvent-free, low odour, water washable cleaner is ideal for cleaning oil brushes. This cleaner is a safer way to clean and restore brushes and is non-flammable and biodegradable. It comes in a 250ml plastic pot.
Gel medium increases buttery character of oil colours and decreases drying time. Useful for impasto techniques and knife application. Add to oils in maximum ratio of 1:4. Contains alkyd resin.
*Recommended to sumi painting drawing writing and watercolorist artists. * It does not have the strong ink smell. *It is a permanent, stable ink. It cannot be re-wetted or reused once it dries. For grey tones simply lighten with added water. * This bottled Sumi ink for calligraphy and brush painting. * After using, the brush can be easily rinsed by dipping in water.
Low-fat (“lean”) painting and thinning medium for oil colours. Recommended for thin grounds and to set up transparency paintings on gouache, tempera and acrylic paints; thins with hardly affecting the drying time and gloss. Dosage: 10 to max. 20%
Low-fat (“lean”) painting and thinning medium for oil colours. Recommended for thin grounds and to set up transparency paintings on gouache, tempera and acrylic paints; thins with hardly affecting the drying time and gloss. Dosage: 10 to max. 20%
Intermediate varnish for painting in oil. Colourless; non-yellowing; fast drying; does not solve just-dried oil colours; it is possible to add a final varnish based on mineral spirit at once; the dried varnish layer remains soluble in turpentine substitute.
Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1). Thinner: Water Handling Shake well before use. AERO TEX is ready to use. Should be mixed with AERO COLOR® Professional in a ration of 1:1. Wash, dry and iron the material beforehand. Spray application wet. After finishing the design let it dry out. Iron the reverse side (cotton about 2 min.; silk / wool about 4 – 6 min.; synthetics about 8 min.; temperature should be adapted to the fabric!). Washable at 30 °C; do not dry clean. The product can be diluted with water, but dries up to a water-insoluble film. Please clean tools as soon as possible with water and/or AERO CLEAN RAPID 50606. Best results are achieved with spray application at processing temperatures between 15 and 30 °C, 2 bar air pressure and a nozzle size of > 0,15 mm for coloured shades and 0,3 mm for effect colours. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required. Sizes: 28 ml