Painting

View as Grid List
Sort by
Display per page

WATER WASHABLE OIL BRUSH CLEANER, DALER ROWNEY

Containing natural oils, this Daler Rowney solvent-free, low odour, water washable cleaner is ideal for cleaning oil brushes. This cleaner is a safer way to clean and restore brushes and is non-flammable and biodegradable. It comes in a 250ml plastic pot.
€10.10 incl tax

Impasto medium (megilp) for oil colours

Gel medium increases buttery character of oil colours and decreases drying time. Useful for impasto techniques and knife application. Add to oils in maximum ratio of 1:4. Contains alkyd resin.
€4.20 incl tax

MUSSINI Medium 1, 60 ml

Low-fat (“lean”) painting and thinning medium for oil colours. Recommended for thin grounds and to set up transparency paintings on gouache, tempera and acrylic paints; thins with hardly affecting the drying time and gloss. Dosage: 10 to max. 20%
€8.90 incl tax

MUSSINI Medium 1, 60 ml

Low-fat (“lean”) painting and thinning medium for oil colours. Recommended for thin grounds and to set up transparency paintings on gouache, tempera and acrylic paints; thins with hardly affecting the drying time and gloss. Dosage: 10 to max. 20%
€17.70 incl tax

Retouching varnish, glossy 60ml

Intermediate varnish for painting in oil. Colourless; non-yellowing; fast drying; does not solve just-dried oil colours; it is possible to add a final varnish based on mineral spirit at once; the dried varnish layer remains soluble in turpentine substitute.
€8.60 incl tax

AERO TEX for adhesion on textiles

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1). Thinner: Water Handling Shake well before use. AERO TEX is ready to use. Should be mixed with AERO COLOR® Professional in a ration of 1:1. Wash, dry and iron the material beforehand. Spray application wet. After finishing the design let it dry out. Iron the reverse side (cotton about 2 min.; silk / wool about 4 – 6 min.; synthetics about 8 min.; temperature should be adapted to the fabric!). Washable at 30 °C; do not dry clean. The product can be diluted with water, but dries up to a water-insoluble film. Please clean tools as soon as possible with water and/or AERO CLEAN RAPID 50606. Best results are achieved with spray application at processing temperatures between 15 and 30 °C, 2 bar air pressure and a nozzle size of > 0,15 mm for coloured shades and 0,3 mm for effect colours. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required. Sizes: 28 ml
€7.70 incl tax