Mediums for acrylics

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1). Thinner: Water Handling Shake well before use. AERO TEX is ready to use. Should be mixed with AERO COLOR® Professional in a ration of 1:1. Wash, dry and iron the material beforehand. Spray application wet. After finishing the design let it dry out. Iron the reverse side (cotton about 2 min.; silk / wool about 4 – 6 min.; synthetics about 8 min.; temperature should be adapted to the fabric!). Washable at 30 °C; do not dry clean. The product can be diluted with water, but dries up to a water-insoluble film. Please clean tools as soon as possible with water and/or AERO CLEAN RAPID 50606. Best results are achieved with spray application at processing temperatures between 15 and 30 °C, 2 bar air pressure and a nozzle size of > 0,15 mm for coloured shades and 0,3 mm for effect colours. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required. Sizes: 28 ml

Retarder is ready to use and should be mixed with acrylic colours on a separate palette in a ratio of max. 30 %. The effect depends on the amount of added medium; adding around 20 % extends the colour’s drying time by approx. 50 %. The product has no properties for film formation and therefore should not be use in pure form! The product can be diluted with water. Please clean tools as soon as possible with water or water and soap. Just dried acrylic colours can be removed with brush cleaner 50051 / 50052. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required.