Mediums/Masking Fluids

Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. Apply with writing pen, cotton bud or wooden stick. Colourless after drying

Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. Apply with writing pen, cotton bud or wooden stick. Colourless after drying

Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. For direct application with the dispensing bottle. Colourless after drying.

Drawing gum for masking specific areas which should remain white on water-colour paper, smooth drawing carton, photographs or films. For direct application with the dispensing bottle. Colourless after drying.

Used to create striking white highlights or areas for overpainting at a later stage. Forms a fast-drying, water-resistant film on watercolour paper and board, easily removed when dry by rubbing with an eraser, soft tissue or cotton bud. An old brush, pen or cotton bud should be used to apply the Masking Fluid as it is extremely difficult to remove from brushes when dry.

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1).

Milky medium without binding agents to be added to AERO COLOR® Professional to increae opacity. The full effect of opacity appears while drying, especially visible on dark grounds. The opacity depends on the amount of added medium (max. 50%) from no up to a little brightening. Not to be udes on its own. Pre-mix with the colour in a little container. To be used in spray guns (nozzle size min. 0,15 mm) LINERS and brushes.

Latex-based liquid frisket which is used for masking certain areas of the work before the paints are applied. Easily removed by rubbing.