New arrivals

Screen printing medium is ready to use and is best added to water-based paints (acrylics or gouaches) in a ratio of 10-50%, depending on the desired consistency. The drying time is extended depending on the amount added: with an addition of approx. 20 %, the drying time is extended by approx. 70 %. There is no change in colour value with the specified quantity ratio. The product cannot be used pure! The product can be diluted with water. Please clean tools with water or water and soap. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required

Final varnish for acrylic painting based on high-quality acrylic resin. ----------------------------------------------------------------------------------------------- The product is ready to use but can be diluted with water if necessary Apply quickly with a suitable varnish brush at room temperature only to a completely dry paint layer (after about 3 days for thinly applied acrylic paints and 1 to 2 weeks for impasto paints). If possible, only apply to slightly absorbent substrates; on absorbent substrates, the varnish may sink in and require repeated application. [Caution! The first layer of varnish will be dissolved again when a second layer is applied]. Clean tools with soap and water immediately after use. The usual layer thickness of varnish has no significant influence on the UV resistance of the paint layer. We therefore strongly recommend working with high-quality, lightfast acrylic paints right from the start. Close the container immediately after use. Store in a cool, dry place and protected from frost Not recommended for exterior use Individual pre-tests are recommended

Final varnish for acrylic painting based on high-quality acrylic resin. ----------------------------------------------------------------------------------------------- The product is ready to use but can be diluted with water if necessary Apply quickly with a suitable varnish brush at room temperature only to a completely dry paint layer (after about 3 days for thinly applied acrylic paints and 1 to 2 weeks for impasto paints). If possible, only apply to slightly absorbent substrates; on absorbent substrates, the varnish may sink in and require repeated application. [Caution! The first layer of varnish will be dissolved again when a second layer is applied]. Clean tools with soap and water immediately after use. The usual layer thickness of varnish has no significant influence on the UV resistance of the paint layer. We therefore strongly recommend working with high-quality, lightfast acrylic paints right from the start. Close the container immediately after use. Store in a cool, dry place and protected from frost Not recommended for exterior use Individual pre-tests are recommended

This pump-spray creates granulation effects in non-granulating watercolours. Spray with the fine atomizer into the still wet watercolour areas to be treated. The pigments there will quickly flocculate. As only a few of the HORADAM® watercolour are originally granulating (marked with a "G" in the colour chart), this medium helps to create a granulation effect for all colours. For already granulating colours the effect will be intensified. Due to the fine atomizer also small areas within a painting can be treated.

Pasty final varnish for paintings in oil made from best white Palembang dammar and beeswax. May only be applied by ball of the thumb or with a lint-free cloth at room temperature to the layer of oil paint after it has dried completely, i.e. after 8 - 12 month at the earliest. After the layer has completely dried (approx. 24 hours) the initial matte varnish becomes satin-glossy by carefully polishing with a soft brush. Contains beeswax, dammar, white spirit.

Mosaic glue - water soluble, removable glue, especially for mosaic using indirect method 100 ml is sufficient for 0.5 - 1,0 m² H0076 - 25 ml, H0077 - 100 ml

Mosaic glue - water soluble, removable glue, especially for mosaic using indirect method 100 ml is sufficient for 0.5 - 1,0 m² H0076 - 25 ml, H0077 - 100 ml

White porcelain powder, extremely hard, for filling molds. Mixing ratio: 3.3 parts Powder: 1 part water. It dries quickly, releases easily from molds and is solid. When dry, the objects have a porcelain effect and can be easily painted. It air dries in approximately 30 minutes. Full hardening is achieved in 12-24 hours, depending on the humidity and temperature of the room. For this reason, after mixing it must be poured into the mold quickly. It is non-toxic and non-harmful. During curing, a temperature (exothermic reaction) of 30-40ºC develops which then drops very quickly. You can first spray the mold with a layer of Rubbing Spray to prevent bubbles from getting trapped and then fill the mold.

Rubbing alcohol spray is an ideal alcohol-based product to clean your surfaces and remove any trace of grease or dirt. You can still easily clean tools you have used with resins as long as it has not started to dry. You can also use the spray to create special effects on resins, such as with pigment or micas powders that will give the impression that they are floating in the material.