Renesans

Transfer medium for transferring laser prints. Can be used with all types of paper except original photos and thicker glossy papers. Do not use with inkjet prints! Apply 3-4 layers of medium to the paper, allowing each to dry well before applying the next - soak the paper in warm water for 20-30 minutes - remove the paper from the water and gently remove the layer of paper, leaving the resulting film with the embedded print - from this point on, the film can be treated like decoupage paper

Size on varnish is an oil and varnish with adhesive properties used for gluing metal flakes. Flakes can be glued after 12 hours. Before applying the mixture, insulate the surface with diluted acrylic paint and smooth after applying several layers. Then apply 1 to 2 thin layers of the mixture with a soft brush. Leave to dry until the mixture is sticky to the touch and start applying gold flakes

Size on varnish is an oil and varnish with adhesive properties used for gluing metal flakes. Flakes can be glued after 3 hours. Before applying the mixture, insulate the surface with diluted acrylic paint and smooth after applying several layers. Then apply 1 to 2 thin layers of the mixture with a soft brush. Leave to dry until the mixture is sticky to the touch and start applying gold flakes

Oil and alcohol with adhesive properties used to glue metal flakes. Especially for surfaces not resistant to water. Flakes can be glued after 30 minutes. Before applying the mixture, insulate the surface with diluted acrylic paint and smooth after applying several layers. Then apply 1 to 2 thin layers of the mixture with a soft brush. Leave to dry until the mixture is sticky to the touch and start applying gold flakes.

Varnish obtained from pure shellac is used as a protective varnish.

Latex-based liquid frisket which is used for masking certain areas of the work before the paints are applied. Easily removed by rubbing.

The paints-inks are based on the Belgian binding agent STANDOLEJ, which offers special viscosity for graphical techniques, mainly for intaglio and relief. The etching paint has two main components: dyes and binding agents, also known as binders. The production process of these paints is composed of two main stages: component mixing and etching paint mixing. They dry quickly with no transparency or spilling and can be mixed and thinned with no risk of changing their initial properties. Etching inks are thinned with oils and mix well, which means that they can be mixed into any shades. Ιn black colour.

The range of 39 colours of BLUR oil paints thanks to the high pigment content yields perfect results, both in pure and mixed colours. The balanced colour palette offers matt colours as well as two types of white. Thanks to a balanced formula based on high quality linseed oil, Blur offers a uniform drying time and a smooth consistency that characterizes the whole colour palette. All 39 colours are available in 200ml aluminium tubes.

Colours matte acrylic paint. Thanks to the application of special resin and pigments, these paints produce a deep matte layer, offer intensive colours, and have good resistance to light. The range includes 30 colours, all of which can be mixed together, and 7 metallic colours. Packaging: 20 ml aluminium tube