Schmincke

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1). Thinner: Water Handling Shake well before use. AERO TEX is ready to use. Should be mixed with AERO COLOR® Professional in a ration of 1:1. Wash, dry and iron the material beforehand. Spray application wet. After finishing the design let it dry out. Iron the reverse side (cotton about 2 min.; silk / wool about 4 – 6 min.; synthetics about 8 min.; temperature should be adapted to the fabric!). Washable at 30 °C; do not dry clean. The product can be diluted with water, but dries up to a water-insoluble film. Please clean tools as soon as possible with water and/or AERO CLEAN RAPID 50606. Best results are achieved with spray application at processing temperatures between 15 and 30 °C, 2 bar air pressure and a nozzle size of > 0,15 mm for coloured shades and 0,3 mm for effect colours. Please don´t use the product below temperatures under 10 °C object- and room-temperatures. Close immediately after use. Store in a cool and dry place. Protect from frost. Individual pre-tests are required. Sizes: 28 ml

Medium for AERO COLOR® Professional for mixing a textile airbrush colour (mixing ratio: 1:1).

Επιβραδυντικό για χρώματα AERO COLOR. Περισσότερες πληροφορίες παρακάτω.

Thinner for AERO COLOR® Professional. Increases transparency; optimizes adhesive properties; increases resistance against wiping and water (regarding to water). Can be mixed with AERO COLOR® Professional as desired. Thinner: Water

Protective lacquer for paintings with AERO COLOR® Professional. Glossy; colourless; elastic; non-yellowing; dilutable with water, but forms rather quickly a water-resistant film. Also an ideal primer if diluted 1:1 with water and a final sealant for working with AERO COLOR® Professional on leather.

A transparent, colourless, light-resistant and nonaging primer for working with AERO COLOR® Professional on non-absorbent surfaces such as plastics and metal. Improves the adhesion properties. AERO GRUND is ready to use. After drying sand down finely and – if necessary – repeat this process.